Kohler K-19033 Guia De Instalacion página 4

Position Lavatory
and Level.
Mark Anchoring
Holes.
Lavatory Placement
2. Install the Lavatory
Install the faucet and drain to the lavatory according to the
manufacturer's instructions.
Drill 1/4" mounting holes at the marked locations on the finished
wall.
Install the hanger bolts.
Carefully position the lavatory on the hanger bolts.
While supporting the lavatory, slide a washer onto each hanger
bolt, then thread a nut onto each bolt
IMPORTANT! Do not overtighten the nuts. Overtightening will
damage the lavatory.
Carefully wrench tighten the nuts.
Connect and tighten the trap to the drain, and complete the water
supply connections to the faucet according to the instructions
packed with the faucet.
Run water into the lavatory and check for leaks.
Clean up with a non-abrasive cleaner.
1052865-2-A
Install Faucet and
Drain.
Install Lag Bolts
and Washers.
4 Kohler Co.