KTM Power Parts 79103990044 Manual De Instrucciones página 4

4
Scope of supply
1x skid plate
2x spacer
2x rubber grommet
2x collar screws M6x20
1x collar screw M6x15
Preassembly
- Mount rubber grommets
plate (all included).
NOTE
The collar of the spacer is on the inside.
- Position the skid plate on the frame.
- Mount screw but do not tighten yet.
- Mount screws and tighten to 10 Nm.
- Tighten screw to 10 Nm.
and spacers as shown on the skid