Cleaning And Maintenance - Remington Compact Ladyshaver WSF4810 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
ENGLISH
NOTE: Before dry shaving, ensure the area is clean, dry and free from creams or oils.
FOR LONGER HAIRS
If you have not shaved for a while, use the trimmer before shaving. This will help you
achieve a more effective shaving result.
Hold the shaver with the trimmer facing your leg and slightly tilted towards you
(approximately 45° angle).
Move the trimmer slowly against the direction of hair growth.
FOR BEST SHAVING PERFORMANCE
We recommend that you use your new shaver daily for 2-3 weeks to allow time to find
the optimum shaving methods for your particular type of hair growth patterns.
CAUTION If your skin is easily irritated by shaving or you suffer from skin allergies, you
should test a section of your arm or leg before using the shaver.

CLEANING AND MAINTENANCE

Care for your appliance to ensure a long lasting performance.
We recommend you clean your product after each use.
The easiest and most hygienic way to clean the appliance is by rinsing the appliance
head after use with warm water.
AFTER EACH USE
Ensure the shaver is switched off.
Remove the shaving head assembly by grasping the trimmers between your thumb and
forefinger and pull upwards.
Blow any loose debris from the foil.
Brush or rinse any accumulated hair from the main body of the shaver, head assembly
and trimmers.
Leave the head assembly open to let the shaver dry completely.
NOTE
Do not rinse with water hotter than 70°C.
Do not submerge the appliance.
Ensure the shaver is turned off when cleaning.
Do not clean the shaving foil with a brush.
At regular intervals, put a drop of sewing machine oil onto the foil and cutter head.
Remove excess oil.
REPLACING THE FOIL AND CUTTERS
To ensure the continued highest quality performance from your shaver, we recommend
that the foil and cutters are replaced every 6 months. These can be obtained from your
nearest Remington® Service Centre.
SIGNS THAT YOUR FOIL AND CUTTERS NEED REPLACING
Irritation: as the foil gets worn, you may experience skin irritation.
4

Publicidad

Tabla de contenido
loading

Tabla de contenido