Device Id; Camera Name And Osd Setup - Steren CCTV-965 Manual De Instrucciones

You can modify unit's name by moving the "active frame" unit's name edit box. Press the [EDIT] key to enter the new name.
Press the [ENTER] key to finish modification. Select the "Confirm" button and press [ENTER] to save the new unit name and
make it effective. Press the "Cancel" button or the [ESC] key to abort modification.

Device ID

When using the IR remote control to operate the DVR, you must set the device ID of the DVR, especially if there's more than
one. The default device ID of the DVR is "88".
In "Display" menu, move the "Active Frame" to the device ID edit box, in the edit status, you can use the numeric keys to
input the new device ID. The device ID value is ranged between1-255.
After you finish the modification, press the "Confirm" button to save and take effect or press "Cancel" to abort modification.

Camera name and OSD Setup

Camera Name
In the "Camera" menu, you can define the name for each camera. Please notice that the camera's name cannot be copied.
20