Date Display Mode: Move the active frame to the Date Display Mode then press [EDIT] then use the [↑] [↓] keys to select
the OSD format. There are the following OSD formats:
MM DD YY
YY MM DD
Where YY means year, MM means month and DD means day.
You can also enable the DST (Daylight-saving Time) function here.
Date OSD Position
In the "Camera" menu you can adjust the position where you want the date to display. Move the active frame to the
"Position" item on the right side of the "Date OSD" item and press [ENTER]. Use [↑] [↓] [←] [→] to adjust the position of the
date.
Video Parameters Setup
For different cameras and different backgrounds, in order to get the best video image, you need to adjust the video
parameters such as brightness, saturation, contrast and hue, etc. You can setup the cameras individually, and you can also
copy the video parameters of one camera to any of the other cameras. Here are the setup steps:
- Enter "Camera" menu, select a camera and enter the "Color setup" menu.
- Adjust brightness, contrast, saturation and hue for each camera. Each time you select a parameter to modify, the screen
will show camera's image with an adjust bar in the bottom. Use [↑] [↓] to adjust the parameter while the changes are show
on the image. Press [ENTER] return to the "Color" menu.
22