Change Direction - HoMedics NMS-675H Manual De Instrucciones E Información Sobre La Garantia

INSTRUCTIONS FOR USE
1. To charge, plug the adapter into a 120 volt AC outlet. The LED lights under the power button will flash in
sequence as the product charges. When fully charged, all 3 LED lights will illuminate without flashing.
2. Place massager around neck (Fig. 1) or area of back you wish to massage. Convenient straps help
assist in easy positioning and intensity control. On the next page you will find detailed instructions on
how to operate the voice control feature of this product.
Fig. 1 Fig. 2
4
VOICE CONTROL INSTRUCTIONS:
1. To utilize the voice control function of this massager, first press the power button. Your shiatsu
massage will begin on the high speed setting. Then press the voice control icon
2. Next, say "HoMedics". The product will respond "I am here". You may then speak any of the following
commands, and the massager will respond with the desired action.
SPEED ADJUSTMENT
To change the speed of your massage, first say "HoMedics" and wait for the product's response. The
product will respond "I am here." Next say "medium speed" to change shiatsu speed to medium, or "low
speed" to change speed to low. The product will confirm your selection by saying "ok, medium speed" or
"ok, low speed".
SOOTHING HEAT
If you wish to activate the soothing heat function of the massager, first say "HoMedics" and wait for the
product to respond "I am here". Once the product responds, say "add heat". The product will respond "Ok,
heat" and the heat function will activate. The Shiatsu nodes will glow red. To turn off the soothing heat,
first say "HoMedics" and wait for the response. Once the product responds, say "heat off". The product
will respond "Ok, heat off" and the heat function will deactivate.

CHANGE DIRECTION

If you wish to reverse the direction of your shiatsu massage, first speak "HoMedics" and wait for the
product to respond "I am here". Then, speak "change direction". The product will respond "Ok, change
direction".
STOP
When you are finished with your massage, say "HoMedics" and wait for the product to respond "I am
here". Then, say "stop" and the product will respond "ok, stop". The Shiatsu massage will stop, and heat
(if activated) will turn off.
To turn the massager on again, say "HoMedics, and wait for the products response. Then say, "Start". The
product will respond "Ok, start", and your massage will begin again.
.
5