Publicidad
Idiomas disponibles
Idiomas disponibles
I. Assembling the freestanding strength training bench (ref.: 2261)
1 - Install the fixed leg (1) onto the rails (4) but do not tighten the screws (13), (15), (16) and (17), as shown in detail view
(see Fig.1).
2 - Insert the carriage (8) in the direction indicated by the stud (27) (see Fig. 7) before fully assembling the rails (4) onto
the other leg.
3 - Carefully position the hand-rail plate (5), the adjustable leg (2) + (3), and the clamping plates (9) in the direction shown
by the details on Figure 3, before attaching the assembly using screws (14), (15), (16) and (17).
4 - Set the assembled bench onto the floor, before fully tightening all attachments.
13
15
1
16
17
Figure 1
II. Assembling the strength training bench onto wall bars (ref.: 2262)
1 - Install the fixed leg (1) onto the rails (4) but do not tighten the screws (13), (15), (16) and (17), as shown in detail view
(see Fig.4).
2 - Insert the carriage (8) in the direction indicated by the stud (27) (see Fig. 7) before fully assembling the rails (4).
3 - Carefully position the hand-rail plate (5), and the clamping plates (9) in the direction shown by the details on Figure 6,
before attaching the assembly using screws (14), (15), (16) and (17).
4 - Install the assembled bench onto the wall bars, before fully tightening all attachments.
13
15
1
16
17
Figure 4
III. Assembling the ropes on the strength training bench (ref.: 2261 & 2262) (Figure 7):
1 - Hook the pulleys (10) of the ropes (7) to the clamping plates (9) using the quick links (12).
2 - Attach the shackle snap hook (11) to the fixed leg (1) (option B) or under the carriage (8) (option A).
1
Figure 7
8
4
1
8
4
1
A
B
11
(two people recommended)
4
5
3
7
2
Figure 2
(two people recommended)
4
5
7
Figure 5
8
27
12
10
(Figure 2):
4
9
3
Figure 3
(Figure 5):
4
9
Figure 6
9
NM27f - Page 2
14
5
15
16
17
14
5
15
16
17
3
2
Publicidad
