Installing The Conference Speakerphone; Connecting The Ac (Electrical) Power And Telephone Line; Data Port; Conference Speakerphone Guidelines - RCA 25001 Guía De Usuario

Installing the Conference Speakerphone

Choose the best location to install your console. A conference room no larger than 12 x 15 square feet
is recommended.
3

Connecting the AC (electrical) Power and Telephone Line

1. Plug the AC adaptor and telephone line cord into the corresponding
jacks located on the bottom of the console.
Caution: Use only the ATLINKS USA, Inc. power supply 5-2575 that came with this
unit. Using other power supplies may damage the unit.
2. Thread both lines through the channels on the bottom of the console.
3. Plug the AC adaptor into an electrical outlet and the telephone line
cord into a modular telephone jack.
4. Place the console on a desk or tabletop in the middle of the
conference area.

Data Port

This conference speakerphone is equipped with a DATA PORT jack for you
to connect an auxiliary phone device, such as a cordless telephone or an
answering machine.

Conference Speakerphone Guidelines

• Make sure the room is quiet enough without noisy equipment such as a
fan. If it's necessary, add some sound-absorbing material in the room,
such as carpeting and/or curtains.
• Speak close to the console at a normal conversational level.
• Keep the console stationary during the conference.
3
1
2
Connections & Set Up
7