Attaching Adapter Plate To Screen With Vesa 200 X 100 Or 200 X 200 Mounting Pattern - PEERLESS PT630 Instalación Y Ensamblaje

Attaching Adapter Plate to Screen with VESA 200 x 100 or
200 x 200 Mounting Pattern For PT632 and PWV220/BK
Attach mounting plate (B) to adapter plate (C) using
3
four M5 x 6 mm screws (M) and four #10 washers (N)
as shown.
• If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not
tightly secured, damage may occur to screen or product may fail.
FOR VESA 200 x 100 MOUNTING PATTERN:
3-1
Choose hole pattern as shown below. Attach
adapter plate (C) to back of screen using four M4 x
10 mm screws (F) as shown below.
*NOTE: If screw (F) gets less than three threads
of engagement, attach adapter plate (C) to back of
screen using four M4 x 20 mm screws (G) and four
spacers (H) as indicated below.
C
F
*For screens with a
hole pattern in a pocket,
spacers (H) go between
adapter plate (C) and
screen.
B
M
WARNING
FOR VESA 200 x 200 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach
adapter plate (C) to back of screen using four
M6 x 12 mm screws (J) as shown below.
*NOTE: If screw (J) gets less than three threads
of engagement, attach adapter plate (C) to back of
screen using four M6 x 20 mm screws (K). If
screw (K) still gets less than three threads of
engagement, use four M6 x 30 mm screws (L).
C
H
7 of 34
C
N
J
ISSUED: 11-19-07 SHEET #: 202-9245-2 07-28-09