Finding Area And Volume; Error/Auto-Range Function - Calculated Industries SCALE MASTER CLASSIC Guia Del Usuario

1.800.561.8187

Finding Area and Volume

Finding Area
1) Roll the first side and press [M1+]
" " will appear in the scale box display and
m
the main display will be cleared.
2) Roll the second side and press
main display will be cleared.
3) Press [RCL] [M2x] . This displays the linear
value stored in this register. The second
press of [M2x] will calculate and display the
area, which is the value stored in
multiplied by the value stored in
Finding Volume
1) Roll the first side and press [M1+]
2) Roll the second side and press
3) Set a Height value (see "Setting a Height").
4) Press [RCL] [M2x] . This displays the linear
value stored in this register. Press
second time to calculate and display the
area. Press the [M2x] key again to find
volume. Press a fourth time to
[M2x]
display the stored height value.
a
ppendix

Error/Auto-Range Function

Error Message – Press [RESET] to clear.
Auto Range Function – When rolling or calculating
large numbers, your answer will be displayed in
the next largest measurement unit (ex: 10,000 M
will display instead of 10,000,000 MM ).
12 – Scale Master Classic
®
www. .com
. A small
[M2x] . The
[M1+]
[M2x] .
.
[M2x] .
[M2x] a
information@itm.com