Whalen Your Zone YZW-10001 Instrucciones De Ensamblaje página 4

(1)
To avoid causing damages to the thread, DO NOT over-tighten the bolts.
1. Unpack the units and confirm that you have all hardware and required parts. Assemble the unit on a carpeted
floor or the empty carton to avoid any scratch.
2. Pick up the Drawer Slides (L) and separate the Slide Runners for the following step. Extend the Slide
Runner all the way forward. Press the plastic release lever of the ball bearing slides up and pull the Slide
Runner complete out.
3. Align and attach the separated Slide Runners to the Drawer Side Panels (J and K) respectively with two 12
mm Bolts (2) per Slide Runner.
ASSEMBLY INSTRUCTIONS
② x 4
DO NOT fully-tighten the bolts initially until all the bolts are ready to assemble.
L
2
(2)
K
2
J
4
2
L
2
L