Features And Opertation; Bluetooth Play And Safe Mode; Colorlight App Connection - Bigben Interactive Colorlight CBLNEONINLEAVESL Instrucciones De Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
If the product light is flashing, it is time to charge the battery.
Features and Operation
Colorlight App
• Your product is compatible with the ColorLight app. Visit the Apple App Store or Google Play Store
to download and install on your mobile device. This app will allow you to control the lighting, alarm
settings and music. Full instructions of how to use the app can be found on the info page within the
app.
Operation
To power or charge the product, please connect to a suitable USB power source using the cable
supplied.
1) Power on the device by pressing the power button.
2) Slide the LED light switch to switch on the lighting.
3) To play music from your phone you need to connect via Bluetooth. The speaker will automatically
be in pairing mode. You can see the Bluetooth connection LED in blue colour flashing on the rear
of the speaker.
4) Go to the settings options on your phone and go to Bluetooth.
5) The Bluetooth music pairing name is "Leaves". Search for this name and select it to pair. NOT
CONNECT TO Leaves BLE. This is for the app control.
6) You will hear a short sound and the blue LED will stop flashing. You are now connected.
7) You can now play music from the Colorlight app, or from your favourite music player.

Bluetooth play and safe mode

Your product also includes a Bluetooth safe mode so you can disable the Bluetooth signal. This is set
using the play/pause button.
Short press of 1s to play / pause the music.
Turn off BT signal by pressing play / pause for 3 sec.
Enable BT signal by pressing play / pause for another 3 sec.
When Bluetooth safe mode is activated, no Bluetooth signal can be seen and you need to enable it
again if you want to play music.

Colorlight App Connection

Note: Please ensure your GPS is enabled to allow the app to function.
Once you have installed the Colorlight app, launch the app and then press the + button on the home
page to connect to your Neon product. The Neon name and image will then appear on the connection
page. Select the name and the app will then connect and allow you to control lighting, alarms and
music remotely.
Note: If you use the alarm feature, please ensure that your speaker is attached to mains power.
If you experience any problems in connection, always check to install the latest version of the app. If
you have any further problems please contact us at support@bigben.fr and please state the phone
model and operating system version you are using. i.e. Samsung Galaxy S8 – Android version 8.0
- EN 4 -

Publicidad

Tabla de contenido
loading

Tabla de contenido