Risk Category Indicator - HoMedics BPA-040 Manual Del Usuario

2. After all symbols disappear, the display will
show "00". The monitor is "Ready to Measure"
and will automatically inflate the cuff to start
measurement.
3. Once your systolic pressure is determined, the
monitor will begin deflating to measure your diastolic
pressure.
Note: This monitor will re-inflate automatically if the
system detects that your body requires more
pressure for measurement.
5. When the measurement is
completed, the cuff will deflate
entirely. Systolic pressure, diastolic
pressure and pulse will be shown
simultaneously on the LCD screen.
The measurement is then
automatically stored into
memory.
19
Note:
1. This monitor automatically turns off approximately
1 minute after last operation. You may also press
the START/STOP button to turn the unit off.
2. To interrupt the measurement, you may press the
START/STOP (recommended), "MEMORY,"
Date & Time Set (
deflate immediately after a button is pressed.

RISK CATEGORY INDICATOR

The U.S. Department of Health and Human
Services and the National Institutes of Health have
developed a blood pressure standard classifying
blood pressure ranges into 4 stages. This unit
is equipped with an innovative blood pressure
classification indicator, which visually indicates
the assumed risk level (normal, prehypertension,
stage 1 hypertension, or stage 2 hypertension) of
each reading. Symbols are described below and
classifications follow the guidelines as described
earlier in this manual (page 5).
) buttons. The cuff will
(No Symbol)
20