Klarstein WINDOW KIT 2 Guia De Inicio Rapido página 6

EN
6
FIXING THE WINDOW SEAL
Fixing the sealing frame for sliding windows
The sliding window sealing frame is designed to fit most standard vertical and
horizontal windows. However, you may need to change some aspects of the
installation for certain types of windows. The sealing frame can be fixed with screws.
Vertical sliding windows
Sealing frame
If necessary, trim on this
side.
Adjusting the sealing frame for sliding windows
Slide frame (B) into frame (A) and adjust
the size of the frame to the width of
your window. Lock the locking screw
(C) in the holes corresponding to the
measured width to ensure that there
are no gaps or air pockets between
the window and sealing frame after
installation.
Horizontal sliding windows
Sealing frame
Note: If the window opening is smaller
than the minimum length of the gasket
frame, cut the end on the other side
of the air outlet short enough for the
gasket frame to fit into the window
opening. Never cut the hole.