Hardware Kit - Ubbink 350x1550 H155 Manual De Instrucciones

WARRANTIES - After-sales service
Swimming pool 350x1550 - H155 cm
Warranty conditions:
The swimming pool must be assembled within 48 hours of the package being opened.
For the warranty to be valid, a concrete slab must be in place and it is essential that it is
sunk in the ground to more than half its height.
Our warranty covers only the replacement of defective parts. It in no way covers demands for compensation or damages. The general warranty does not apply in the following circumstances:
• Use of the equipment in a way which is not in accordance with the instructions.
• Damage incurred as a result of bad handling during and after assembly.
1) Pump : 2 year warranty (electrical problems) under normal usage conditions. The following are not covered by the warranty: Deterioration by abrasion or corrosion, deterioration due to a faulty connection,
equipment dismantled or repaired by a third party, parts breaking (pump base, prefilter cover, hose connector...), running the pump when dry. The warranty is void if the electrical cable and/or the plug are
replaced, removed or damaged
2) Liner : 2 year warranty under normal usage conditions. The following are not covered by the warranty: Punctures, holes, tears, stains (treatment products directly in the water), stains due to algae growth, stains
due to decomposition of foreign bodies in contact with the liner, stains and decolouration due to oxidising products, colourfastness and wear due to rubbing on various surfaces. Deformation of the liner left without
water for more than 24 hours (never empty your swimming pool completely).
3) Filter : 2 year warranty on non-installed products: tank, drainage plug, collar, multiport valves... The following are not covered by the warranty: Watertightness problems following use of pressure greater than the
maximum authorised pressure. (ref. filter notice).
4) Skimmer : 2 year warranty on the seal joints.
5) Wooden structure : 10 year warranty against corrosion and insect attack. The following are not covered by the warranty: Changes in wood colour due to weather, natural deformations (splitting, cracks which
in no way impair the mechanical performance of the wood). The warranty does not cover assembly or storage faults producing deformations in the wall panels (if assembled a long time after the package being
opened), deformation of the planks which in no way impairs the mechanical performance of the swimming pool.
IMPORTANT : The after-sales service will be available only at point of sale.
Essential records for claiming the warranty: - Till receipt/proof of purchase.
- Warranty slip.
- Reference number of the faulty part.
Shop :
City :
Contact department :
Direct tel :
Code Ref. Désignation
PL
7100204 Pair of rungs for wooden ladder H150 cm
M
7504334 Plank 45 x 145 x 1480 mm
MSE
7504335 Upper plank 45 x 135 x 1480 mm
MSS
7504336 Upper skimmer plank 45 x 135 x 1480 mm
MSI
7504337 Lower skimmer plank 45 x 145 x 1480 mm
MR
7504338 Water jet plank 45 x 145 x 1480 mm
PA
7514262 P1 corner post 100 x 115 x 1423 mm
PJ 7514263 P2 joint post 100 x 120 x 1423 mm
B1 7504341 Notched planking 45 x 170 x 3180 mm
B2 7504349 Notched planking 45 x 170 x 3430 mm
B3 7504357 Notched planking 45 x 170 x 3263 mm
PS 7504346 Galvanised steel support plate 300 x 255 mm
JA
7514264 Galvanised steel corner joint 100 x 1447 mm
JAR
7514266 Angle reinforcement junction in galvanized steel 119 x 1423 mm
JD
7514265 Galvanised steel straight joint 118 x 1447 mm
PF
7504364 Finishing profile 990 x 60 x 10 mm
MG-2
7504390 Pine edging 27 x 145 x 1596 mm corner 45° right
MG-1
7504392 Pine edging 27 x 145 x 1596 mm corner 45° left
MG-3
7504391 Pine edging 27 x 145 x 1746 mm corner 45° right
7504394 Pine edging 27 x 145 x 1746 mm corner 45° left
MG-4
7504403 Pine edging 27 x 145 x 3010 mm
R
7514016 Hung 2.06 ml hanging rails
C
7514048 Console edging 45 x 230 x 170 mm
ME
7514052 Ladder step 28 x 145 x 600 mm
7514114 Sacrifice part 45 x 135 x 280 mm
7514149 Sandbag 25kg TEN 0.75
7514750 Stainless steel ladder
POOLMAX
Plumbing kit
S Skimmer large
Wall protection felt
Ground protection felt
Filter
Flexible pipe, 25 m
Sweeping attachment
PVC tube, 1 m
Finishing profile liner rails
Stainless steel ladder mount
Corner profile 453 x 70 mm, anaodized alu
Profile 313,5 x 70 mm, anodized alu
NOTICE 350x1550 - H155-2015.indd 9
Client :
Address :
City :
Tel :
Qty Qty
7514754

Hardware kit

parcel ASS
1 Code Ref. BREAKDOWN OF THE HARDWARE KIT
235
A0 7514267 Console + reinforcer bag
22
A2 7514606 Console + reinforcer bag
2
A3 7514638 Console + reinforcer bag
2
C2 7514639 Hung rails bag
3
DMP0 7514457 Bag of screws for pool
4
DMP2 7514618 Bag of screws for pool
20
J1 7504411 Post fasteners bag
8
K1 7504413 Post fasteners bag
2
7514271
Metal shoe fastener bag
P1
7514273
2
N 7514275 Wooden ladder bag
24
M 7514276 Wooden cache planks fastener bag
4
4
MG-4
20
MG-3
24
4
4
4
4
16
18
48
MG-1
5
2
MSE
5
1
1
1
2
3 M
5
1
1
MR
1
8
37
PF
1
4
12
8
I / 15-1
7504487 Blue 75/100 liner 350 x 1550 - H155 cm
1
Qté Qté
parcel ASS
7504488 Beige 75/100 liner 350 x 1550 - H155 cm
1
1
5
3
1
3
2
2
2x2
1
MG-2
1
JD
R
PL
ME
1
or
1
JA
JAR
B3
S
MSI
MSS
C
B1
PA
PS
B2
PJ
07.12.15 09:38