Sauder 419409 Manual De Instrucciones página 5

Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (10F) into the large holes in the ENDS (A and B)
and UPRIGHT (C).
Repeat this step for the BOTTOM (E).
å
(10 used)
www.sauder.com/services
Do not tighten the TWIST-LOCK® FASTENERS in this step.
10F
A
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
B
419409
C
Page 5