Selecting Units Of Measurement; Resetting Data - ADVANSEA MULTI S400 Manual Del Usuario

2.2.3. Selecting units of measurement

To change the unit of measurement for some data in the upper line, press at least 2 seconds
on the key.
To change the unit of measurement for some data in the lower line, press at least 2 seconds on
the key.
The following table summarizes the various units displayed according to the data selected:
Data
Temperature
Depth
Speed over ground
Boat speed
Average speed
Max speed
Trip log
Total log
In bold, default units.

2.2.4. Resetting data

To reset the average speed and max speed data on the upper line, first display the parameter
to be reset to 0 and press simultaneously at least 2 seconds on the
To reset the average speed, max speed, Trip log and Total log data on the lower line, first
display the parameter to be reset to 0 and press simultaneously at least 2 seconds on the
+ keys.
°Fahrenheit
Feet
Knots
Nautical Miles
Installation and Operation Manual S400 series
Unit of measurement
km/h
Kilometres
°Celsius
Metres
Miles/h
Miles
+ keys.
10