Using Multiple Guns With Same Cradle; Comunicazione Di Più Lettori Con La Stessa Base Radio; Utilisation De Plusieurs Lecteurs Pour Une Meme Base; Verbinden Mehrerer Leser Mit Einer Station - Datalogic Dragon M Serie Guía Rápida

6.
Read the Bind code to pair the DLL6000-R to the OM6010-R.
7.
The reader is dedicated to the cradle. Any previously bound reader will
be excluded.
To connect several guns to the same cradle see the following section

'Using Multiple Guns with Same Cradle'.

The green LED on the DLL6000-R will go on: the reader is ready to be
inserted into the cradle.
Firmly insert the reader into the OM6010-R; a beep will be emitted,
8.
signalling that the OM6010-R has been paired to the DLL6000-R.
Configure the OM6010-R base, refer to the "OM6010-R Quick
9.
Reference".
USING MULTIPLE GUNS WITH SAME CRADLE
If you want to use several guns associated with the same cradle, you must first
Bind the cradle with one of the guns (see the previously described
configuration procedure).
Successive guns can be associated with this same cradle by following the
configuration procedure substituting the Bind command with Join (stetp 7).
7.
WARNING
Exit and Save configuration
If the cradle is not bound to a gun, its address assumes a
random value which can cause conflicts and malfunctions
to other cradles within its range.
Bind
Join
73