Using Dragon™ M Laser Guns; Aiming System - Datalogic Dragon M Serie Guía Rápida

DATALOGIC
UK/US
USING DRAGON™ M LASER GUNS
The DRAGON™ M series laser gun can be used with either an
OM-DRAGON™ cradle or STARGATE™ radio base station to build a Cordless
Reading System for the collection, decoding and transmission of barcoded
data.
DRAGON™ M is also completely compatible with the DLL6000-R/OM6010-R
Cordless Reading System.
DRAGON™ M laser guns automatically scan barcodes at a distance. Simply
aim and pull the trigger.
SCAN LINE POSITION
Code scanning is performed along the scan line emitted from the reading
window. This line must cross the entire code.
OK NO

AIMING SYSTEM

DRAGON™ M provides a programmable aiming system. If enabled, the scan
line emitted from the reading window is preceded by a red spot which must
illuminate the code center to get the best reading performance (see figure
above, ). Once the defined timeout is reached, the red spot disappears and is
followed by the scan line to start the code scanning.
2