Intended Use - Forch 6000 0210 Manual De Instrucciones

DANGER!
Danger of life from fire and/or explosion!
Danger to life if the device is not used as intended! For this reason, observe the following
safety instructions:
■
When handling hazardous substances always wear appropriate protective clothing,
including protective gloves and breathing protection. Avoid any sources of ignition in the
vicinity and ensure that the work place is well ventilated.
■
Inflammable media may not be applied with this device.
WARNING!
Contact with cleaning fluids poses a health risk!
Inhaling, swallowing or skin contact with cleaning fluids may impair your health to some
extent. If symptoms occur, or in case of doubt, consult a doctor. Consult a doctor if you
develop symptoms or are unsure.
For this reason, observe the following safety instructions:
■ Observe the safety instructions on the cleaning substance labels. Safety goggles,
protective gloves or other protective measures are advised when using certain foam
cleaners.
■ Always request a safety data sheet according to 1907/2006/EC from the spraying agent
manufacturer. This states the recommended protective equipment and measures for
each agent.
Equipment
■ Safety / pressure relief valve (A)
■ Valve body complete (B)
■
Felt washer (C)
■
Flat spray nozzle (D)
■ Connecting nipple (E)
■ Pump pipe (F)
■
Push button (G)

Intended Use

■
The industrial device FM10 is designed for foaming liquid cleaning agents as far as
those agents do not affect the materials used.
■ The device may only be used for applying media which are suitable for foaming. Foam
formation is influenced by:
1. the concentration of the medium in the solution.
2. the water hardness.
3. the disposition of the medium to foam.