3.4.3 Setting Auto-attendant mode for a specifi c line
- Format: 1 0 M #
- Explanation: M = line number (1-3)
- Description: Set the specifi c line (M) in Auto-attendant mode.
Example: To program lines 2 and 3 in Auto-attendant mode, all other
extensions in the Operator mode.
In
programming
Dial 11#
mode
Listen a tone
-If the caller doesn't know the number extension, can ask to the
operator dialing "0".
- Outgoing message must be record when the mode is set.
3.4.4 Setting Operator mode for a specifi c line
- Format: 1 1 M #
- Explanation: M = line number (1-3)
- Description: Set the specifi c line (M) in the Operator mode
Example: To program lines 1 and 3 in the Operator mode, the other
one will be in Auto-attendant mode.
In
programming
Dial 10#
mode
Listen a tone
Dial 102#
Listen a tone
Dial 111#
Listen a tone
Dial 103#
Hang up
Listen a tone
Dial 113#
Hang up
Listen a tone
13