Troubleshooting; Specifications - Steren MUL-095 Manual De Instrucciones

7. TROUBLESHOOTING

Trouble
The multimeter is not
showing a reading.

8. SPECIFICATIONS

Input: 9 Vcc (1 square battery)
Resistance: 200 to 2 Mohms accuracy + 1%+2dgt
DC Voltage: 200 mV to 1000 V accuracy + 0.5%+1dgt
AC voltage: 200 V to 750 V accuracy + 1. 2%+4dgt
AC current 20A-1000A ±2. 5%+5dgt
Temeprature -40°C to 750°C ±3%+2dgt
LCD screen: 3 1/2 digits, with polarity indicator
Operational temperature: 0 to 50° C
RH: < 75%
K type thermopar
Nominal consumption: 0.127 kWh/year
Stand-by power consumption: not applicable
Product design and specifications are subject to change without
previous notice.
- Make sure all cables are properly connected
- Verify that the cables are in the correct location.
- Adjust the knob to the correct scale.
- Make sure the multimeter is turned on.
- Change the battery.
Solutions
15 15