Charging Time - Plantronics B230-M Guia De Inicio Rapido

step 1 Set up your headset and computer
install the software
Download and install the Plantronics software at plantronics.com/software.
Note You must be connected to the internet in order to access the software.
Once the software is installed, Windows users can access the utility by
selecting Start > Programs > Plantronics > Plantronics Control Panel.
charge your headset
To calibrate your headset and provide optimal
performance fully charge the headset before using.
The headset LED will be solid red to indicate that
the headset battery is charging. When fully charged
the LED goes off.
Note
To charge the headset with USB charging cable the PC must be on and in
an active state.
reset smart sensors
To reset the Smart Sensors, connect the headset to the charger and place the
headset on a flat nonmetallic surface for 10 seconds.
step 2 Connect your headset and USB adapter
Pair your headset

charging time

30 min ...........................
Minimum charge
1 ready
before first use
Activate the Bluetooth feature on your phone, then use the phone's settings
1.5 hours ......................................
Full charge
to add/search/discover new Bluetooth devices.
2 set
To activate Bluetooth pairing mode, press and hold the power button until
LED flashes red/blue to indicate pairing mode.
3 connect
• Select
phone.
• If phone asks for a passcode, enter four zeros
screen.
• Some phones also ask to confirm headset connection after pairing.
• Headset LED will stop flashing red/blue once your phone and headset are
successfully paired/connected.
VoyagerPRO UC v2
ready
set connect
BlackBerry® Settings/options > Bluetooth: On > Search for devices.
iPhone Settings > General > Bluetooth > On (starts the search for devices)
Android Phone Settings > Wireless > Bluetooth: On > Scan for devices
Voyager PRO UC from the list of Bluetooth devices shown on your
0000. You may see **** on