Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
* Please keep this owner's manual for future reference.
*If you have opened the carton and removed all packaging, please disregard STEP 1 and 2 and go to STEP 3 directly.
STEP 1.
(1)
Open the carton. Make sure the 4 pieces of the carton
are being opened up as below in Figure STEP 1.
(2)
Lift off the carton carefully and be aware of the
accessories inside possibly falling away.
(3)
Take all the packing materials away except for the
polygonal surrounding fire pit.
STEP 3.
(I) Attach the rear panel and a
decorative panel to the FRIM pedestal
using 2pcs M6 x 50 screw and 2pcs
M6 nut.
(II) Attach the door assembly and
2pcs of decorative panel to the FRIM
pedestal using 2pcs M6 x 50 screw
and 2pcs M6 nut.
(III) Attach the 2pcs of side panel to
the rear panel and door assembly
using 8pcs M6 nut.
(IV) Attach the chimney to the rear
panel and door assembly using 4pcs
M6 x 15 screw and 4pcs M6 nut.
See Figure STEP 1.
STEP 2.
(1)
Turn the fireplace heads up on a flat ground.
(2)
Remove all the polyfoam surrounding outdoor
fireplace.
See Figure STEP 2.
3
Publicidad
