Installation; Placing The Stb; Connecting Cables - Trevi HE 3375TS Manual Del Usuario

HE 3375TS ENGLISH
10. GOTO: Selects a specific time index.
11. PREV: Skips to the previous media track.
12. NEXT: Skips to the next media track.
13. REPEAT: Turns Repeat mode ON/OFF
14. STOP: Stops media play.
15. STANDBY: Turns the set top box ON or to Standby.
16. USB: Change source between
TV and Media.
17. AUDIO: Selects an Audio Language or Audio mode.
18. UP/DOWN: Navigates through the menus or
selects the next or previous channel.
19. MENU: Turns on the Main menu.
20. FAVOURITE: Turns on the Favorites menu.
21. 0-9: (Numeric Buttons): Selects a channel or setting.
22. FWD: Searches forwards during media play.
23. REV: Searches backwards during media play.
24. PLAY: Starts or resumes play.
25. PAUSE: Pauses media play.
26. COLOUR BUTTONS: Operates different functions in TEXT screen.
27. REC: Used to record programmes.
Not available.
28. LIST: Used to show the recorded programme list in the current disk. Not available.
(Also used with the USB play/record functions).
29.TIMER:timed playing

Installation

4.
4.1. Placing the STB
Place the STB on a stable table.
Note: Do not place anything on the STB. Leave over 10cm space around two sides of the STB for
radiating.

4.2. Connecting Cables

For a basic connection from your Set Top Box to your television set, you can use Scart
connection. For a higher quality connection, use a direct HDMI connection, as shown
below. Connect a audio amplifier use coaxial is a optional.
Note: Before the operation, power off all devices to be connected
(for example, TV and STB)
19