Wall And Floor Attachment - Electrolux ECFI3068AS Instrucciones De Instalación

30" ELECTRIC RANGE INSTALLATION INSTRUCTIONS
This range is equipped with a factory-connected
power cord. The cord must be connected to a
grounded 120/240 volt or 120/208 volt outlet. If no
outlet is available, have one installed by a qualified
electrician.
CAUTION
Do not use multiple outlets, exten-
sion cords or adapters.
See the rating plate for technical specifications. The
rating plate is visibly located on the right side of the
oven door frame.
This ID plate must never be removed.

Wall and floor attachment

Electrical shock hazard
WARNING
• Use extreme caution when
• Identify the location of the
• Failure to follow these
• Contact a qualified installer
CAUTION
• Failure to follow these
Visually check from the inside
WARNING
of the drawer that the wall/
floor-mounted bracket is
inserted into the appropriate
lateral hook (left side).
Positioning the bracket using the template:
1. Choose the correct side of the template, based
on the model.
9
drilling holes in the wall or
floor. There may be con-
cealed electrical wiring
behind the wall or under the
floor.
electrical circuits that could
be affected by the installation
of the anti-tip device, then
turn off power to these cir-
cuits.
instructions may result in
electrical shock or other per-
sonal injury.
or contractor to determine
the proper method for drilling
holes through the wall or
floor material (such as
ceramic tile, hardwood, etc.)
instructions may result in
damage to wall or floor cov-
erings.