Playing An Audio Cd - Yamaha CD-S303 Manual De Instrucciones

OPEN/CLOSE
Numeric keys
CD/USB
12
En
PLAYING AUDIO

Playing an audio CD

This unit enables you to play data CDs as well as audio CDs. For
information on the type of CDs that can be played on this unit,
please refer to "Supported file formats/discs/USB flash drives"
(page 20).
1
Press CD/USB to switch to Disc mode.
The playback media indicator (CD) on the display lights up.
2
Place a CD on the disc tray.
Press OPEN/CLOSE repeatedly to open and close the disc
tray.
Note
• You can also press (Open/Close) on the front panel repeatedly to
open and close the disc tray.
3
Press (Play).
The (Play) indicator on the display lights up and playback
starts.
Note
• During audio file playback, the playback media indicator reflecting the
file format lights up.
Notice
• Do not insert your hand or finger into the disc tray slot. Doing so might
cause injury.
Note
• After you place a CD on the disc tray, the disc tray will close and playback
will start if you perform one of the following operations:
– Press (Play).
– Press a numeric key that corresponds to a track number.
• You can configure the unit so that playback automatically starts when
power to the unit is turned on or when you switch to Disc or USB mode
(page 19).
(Default: Automatic Playback On)
Use the following remote control keys to navigate the operation.
Available keys
The (Play) indicator on the display lights
(Play)
up and playback starts.
The (Pause) indicator on the display lights
up and playback pauses.
(Pause)
press to resume playback.
Stops playback.
(Stop)
(Search backward)* Searches tracks backward.
Searches tracks forward.
(Search forward)*
Skips back to the previous track. Skips back to
the top of the current track if pressed during
(Skip backward)*
playback.
Skips to the next track.
(Skip forward)*
Enter a track number to directly select the
Numeric keys
corresponding track.
FOLDER ,
Enable you to select a folder.
(Data CDs only)
* The control buttons on the front panel function as follows:
(Skip backward/Search backward):
Skips back to the previous track. Skips back to the top of the
current track if pressed during playback. It also searches
tracks backward if you press and hold the button.
(Skip forward/Search forward):
Skips to the next track. It also searches tracks forward if you
press and hold the button.
Function
alternatively,