Advanced Functions; Random-Sequence Playback; Repeat Playback; Playing Tracks In The Specified Order (Program Playback) - Yamaha CD-S303 Manual De Instrucciones

PROGRAM
RANDOM
REPEAT
Numeric keys
CLEAR
ENTER
14
En

Advanced functions

You can configure playback mode and display settings using
advanced functions.

Random-sequence playback

Press RANDOM to play tracks in random order. Pressing RANDOM
repeatedly will change the Random-sequence playback setting as
follows:
Indicator
RNDM Plays all tracks in random order.
Off Turns off Random-sequence playback.
Note
• Do one of the following to cancel Random-sequence playback:
– Press (Stop).
– Open the disc tray.

Repeat playback

Press REPEAT to play tracks repeatedly. Pressing REPEAT
repeatedly will change the Repeat playback setting as follows:
Indicator
REP Plays one track repeatedly.
REP FOLDER
Plays tracks in the current folder repeatedly.
(Data CDs and USB
flash drives only)
REP ALL Plays all tracks repeatedly.
Off Turns off Repeat playback.
Note
• Do one of the following to cancel Repeat playback:
– Press (Stop).
– Open the disc tray.
Playing tracks in the specified order
(Program playback)
You can play audio CD tracks in the specified order.
1
Press PROGRAM while playback is stopped.
CD
Setting
2
Use the numeric keys to enter the track number of a
song you want to program.
CD
3
Press ENTER.
Repeat steps 2 and 3 to program each track.
Press CLEAR to cancel each programmed track starting with
the last track you programmed.
4
Press
Setting
The unit starts to play the tracks in the programmed order.
Note
• Program playback does not work with data CDs or USB flash drives.
• You can program up to 24 tracks.
• Do one of the following to clear all programmed tracks:
– Press CLEAR while Program playback is stopped.
– Turn off the power to the unit or set the unit in Standby mode.
– Open the disc tray.
TEXT AAC WAV FLAC RESUM RDY TRACK TOTAL REMAIN PROG RNDM REP FOLDER ALL A - B
TEXT AAC WAV FLAC RESUM RDY TRACK TOTAL REMAIN PROG RNDM REP FOLDER ALL A - B
(Play).