Philips HI153/02 Manual De Instrucciones página 4

English
The compact, lightweight design makes this iron ideal for taking it along
on your travels in its handy pouch.
The iron can safely be used on all mains powers (110-120 / 220-240 V) ,
as it is provided with a voltage selector.
As electrical sockets are not the same everywhere, the plug supplied
may not be suitable.
Ask your travel agent for advice regarding voltage and connection
details.
Suitable adaptor plugs are often available at Philips dealers, service
centres, hotel reception desks and hardware stores.
Important
• Please read these instructions for use carefully in conjunction
with the illustrations before using the appliance.
• Always check the voltage selector (C) before using (fig. 2). You
can use a coin to adjust the voltage selector to the local mains
voltage.
It is advisable to always reset the selector to position 220/240
after use. This will prevent damage if the iron is inadvertently
connected to the wrong voltage.
• Never use the appliance if damaged in any way.
• Take care that children cannot touch the iron when hot and
that they cannot pull the mains cord.
• Remove the plug from the socket before filling the iron with
water or pouring out the remaining water after use. Fill the iron
from the supplied filling cup to avoid spillage.
• Do not put vinegar or other descaling agents into the water
reservoir. Do not use chemically descaled water.
• The cordset should not be allowed to touch the soleplate when
it is hot.
• Never immerse the iron in water.
• Always place the iron with its back on a firm flat surface when
interrupting ironing and after use. When leaving, even when
only for a short while, always unplug the iron.
4