Motorola RLN6257 Manual De Instrucciones página 6

Step 5. Using the bracket as a template, mark the location for the screws.
Step 6. Centerpunch and drill a 0.101" diameter hole at both locations.
Step 7. Mount the wall mount bracket to the surface with the supplied
screws.
Step 8. Firmly seat the hanger bracket (attached to the speaker) in the
wall mount bracket.
Dual Trunnion and Wall Mount Installation
In some installations, such as in school buses, where the speaker may be
subject to excessive strain or abuse, it may be desirable to use both the
trunnion mounting bracket and the wall mounting bracket. In this case,
follow the procedures in both 2.2 and 2.3, but use the dimensions in
Figure 2 to locate the hole centers.
NOTE: Do not use Figure 2 as a template to drill holes for mounting. It is
only to be used as a reference to show the relevant measurements.
4
1.92"(48.77mm)
0.96"(24.38mm)
Wall Mounting Bracket
2.56"(65.02mm)
2.31"(58.67mm)
1.155"(29.34mm)
Trunnion Bracket
0.375"(9.53mm)
Figure 2. Dual Trunnion
and Wall Mount Dimensions
MAEPF-26871-O