Sony Ericsson HCB-300 Manual Del Usuario página 10

English
Troubleshooting
This section lists some problems that you might
encounter while using your car handsfree.
Cannot add the car handsfree to the
list of devices in the phone
The Bluetooth function in your phone must be
turned on. Your phone should be inside the car
during the procedure and the car handsfree must be
on. Make sure that no solid object is between the
phone and the car handsfree.
Phone and car handsfree do not
connect
The car handsfree may be connected to another
Bluetooth device. Manually select your Color ID,
see "Selecting a phone" on page 8.
Your phone may be connected to another
Bluetooth device, such as a headset. Disconnect the
other Bluetooth device.
You may have added another handsfree device
to the list of devices in your phone. Some phones
can only have one handsfree device in the list at a
time. Please refer to the phone's user guide.
10
This is the Internet version of the user's guide. © Print only for private use.
Connection interrupted
You hear a short sound if the connection between
the phone and the car handsfree is interrupted.
Try connecting them again by pressing
Using headset and car handsfree
Please refer to the phone's user guide on how to
use your phone with several Bluetooth devices.
Resetting the car handsfree
You may want to reset the car handsfree to
default settings.
To reset the car handsfree
1
Turn on the car handsfree.
2
Press and hold until the Color ID flashes
and you hear a long high tone.
3
Press and hold until you hear a long
high tone.
4
The car handsfree is now reset.
.