Technical Data - Black+Decker MTIM3 Manual Del Usuario

ENGLISH
Use
Warning! Let the tool work at its own pace. Do not
overload.
Screwdriving / nut setting
Note: Ensure the forward reverse slider (2) is not
in the locked position.
Select the appropriate bit / socket for the screw
u
or nut to be driven.
Select forward or reverse rotation as described
u
above.
Hold the tool in line with the fastener.
u
After tightening, check torque with a torque
u
wrench.
Hints for optimum use
Screwdriving
Always use the correct type and size of screw-
u
driver bit.
If screws are difficult to tighten, try applying a
u
small amount of washing liquid or soap as a
lubricant.
Always hold the tool and screwdriver bit in a
u
straight line with the screw.
6
(Original instructions)
Accessories
The performance of your tool depends on the
accessory used. BLACK+DECKER and Piranha ac-
cessories are engineered to high quality standards
and designed to enhance the performance of your
tool. By using these accessories you will get the
very best from your tool.

Technical data

Sander
No-load speed min
Beats
min
Max. torque
Nm
(PTI Rating)
Chuck capacity
mm
Weight
kg
Level of sound pressure according to EN 60745:
Sound pressure (L ) 96.2 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 107.2 dB(A), uncertainty (K) 3 dB(A)
WA
MTIM3 MTIM3
(14.4v)(H1) (Max)(H1)
-1
0-2800 0-3000
-1
0-3100 0-3500
170 205
6 (Hex) 6 (Hex)
1.3 1.3