9. Cleaning
Use an alcohol swab or cotton tissue
moistened with alcohol (70%
Isopropyl) to clean the thermometer
casing and the measuring probe.
Ensure that no liquid enters the
interior of the thermometer. Never
use abrasive cleaning agents, thin-
ners or benzene for cleaning and
never immerse the instrument in water or other cleaning liquids.
Take care not to scratch the surface of the probe lens and the
display.
10. Replacing the Battery
This instrument is supplied with one lithium battery, type CR2032. The
flashing battery symbol will appear on the display when it is low. To re-
place it, remove the battery cover by loosening the screw on the
back of the thermometer. Remove the battery and replace with a new
one.
15