Vicks VEV400 Serie Manual De Uso Y Cuidado página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating
2.
Turn the Power Knob to high (
High (
) setting will provide quicker moisture output. The fan will push more moisture off the
Wicking Filter and into the air. The water level will go down faster than on the low ( ) setting
since more moisture is going into the air.
Low ( ) will provide less moisture output. The fan will run quieter and the Water Tank will not
have to be filled as frequently since less moisture is going into the air.
3.
When the Tank is empty, turn off the humidifier and refill it. NOTE: If the humidifier will not be
used for more than a few days, empty the water from the Water Tank and Removable Tray and
dry out the filter to prevent growth of bacteria or mold.
NOTE: While the humidifier is operating, you will hear the fan running but will NOT see the
moisture output. This is normal for an evaporative humidifier. To check the humidity level in the
room, use a humidity monitor like the Vicks V70 or V70-CAN, available at retailers or online at
www.vickshumidifiers.com.
You may hear a gurgling sound. This is the water flowing from the Water Tank into the Removable
Tray and indicates your humidifier is working properly.
Using Vicks VapoPads
Step 1
Your Cool Moisture Humidifier can be used with Vicks VapoPads to provide up to 8 hours of soothing
vapors. One free sample of the menthol VapoPad is included with your humidifier. To use your unit
with scent pads:
1.
Open Scent Pad Door.
2.
Open Scent Pad by tearing notch on pad bag. DO NOT touch pad with hands. If pad is touched
DO NOT rub face or eyes as it may cause irritation.
3.
Insert Scent Pad with angled end facing towards the product. Up to two VapoPads can be
inserted. Close door.
4.
After 8 hours discard VapoPads.
To continue using VapoPads, repeat steps 1–4.
VapoPads Recommended Usage:
• Not recommended for infants under 10 lbs (4.5 kg).
• For children between 10-22 lbs (4.5-10 kg ) DO NOT use more than 2 pads in a 24 hour period.
Scent Pad Ingredients: VSP-19, VSP19FP, VSP19VPC, VSP-19-CAN: Eucalyptus Oil, Menthol, Glycol,
Cedar Leaf Oil & Others.
6
) or low ( ) setting.
Step 2
Step 3
Step 4
12
1
11
10
2
9
3
8
HOURS
4
7
5
6
(Continued)

Publicidad

Tabla de contenido
loading

Tabla de contenido