Waring Commercial 2 Litre Blender Manuel D'instructions página 5

hot Blending Instructions–Important!
To minimize the possibility of scalding when blending hot materials, the following
precautions and procedures must be observed:
Hot materials are those which are 100˚ F (38˚ C) or hotter.
If you are using the standard container lid that originally came with your blender, limit the
amount of material processed to 1/4 of container capacity and completely remove the center
stopper in the lid before turning on blender. This will allow venting of the rapidly heated and
expanding air present inside container when blender is running.
Always start blending on lowest speed setting, then progress to desired speed.
Never stand directly over blender when it is being started or while it is running.
Constant monitoring of the condition of the container lid is mandatory.
Replace the lid if it becomes worn or loose, or is damaged in any way.
Note:
A special accessory Hot Blending Lid assembly which allows safe
processing of larger loads is available for stainless steel containers.
Order: Two-Litre Hot Blending Lid, Catalog No. CAC15.
If you are using the special accessory Hot Blending Lid, follow the
instructions packed with the lid.
Before proceeding with hot blending, please
reread all instructions in this operating manual.
Maintenance
Motor - Not for waterjet cleaning. The Waring
® Commercial Blender sleeve
bearing motor requires no greasing or oiling. Sealed-in lubrication provides the
smooth operation of unit.
4
12wc129645_2litre_blender_ib.indd 4 1/17/12 11:46 AM