Publicidad
Idiomas disponibles
Idiomas disponibles
Prior to
Installation
EN
installation
After installing and connecting the ultrasonic device, we recommend retesting the device to ensure that it
functions correctly. Perform the test using an ultrasonic tester (Item code. 07595). If the function check is
successful but ultrasound is not emitted after installation, an installation error has occurred.
Blinking at regular intervals (approx. every 5 seconds) = OK: Ultrasound is being emitted.
LED off = device is switched off.
Prior to
Installation
installation
1.
Is the operating voltage (12 V plus and minus) of the car battery also present at the unit connections?
2.
Is the engine switched off?
3.
Does the cable to terminal 15 have any voltage? (Is the ignition switched on? If so,
the device will be switched off.)
Prior to
Installation
installation
Function control lights
8
Function
Trouble
Circuit
check
shooting
diagram
Function
Trouble
Circuit
check
shooting
diagram
Function
Trouble
Circuit
check
shooting
diagram
Ultrasonic speakers
Fuse box
Terminal 15
0.5 A F
Prior to
Warranty
installation
IMPORTANT! Terms of the warranty (please keep in a safe place)!
Our Ultrasonic device with 2 speakers comes with a 48-month functional warranty.
1.
Any reasonable complaints within the warranty period from the date of purchase will be remedied free
of charge, either through repair or delivery of a replacement product at our discretion. In order for the
warranty to apply, our product must have been properly installed and maintained in accordance with
our installation instructions.
2.
To enable us respond to problems, please return the complete unit, including the cable and installation
Warranty
invoice, initially at your own expense. Once the problem has been resolved, the product will be returned
to you free of charge.
3.
We are not liable for any further claims, such as costs for installing/deinstalling the unit. Any claim
under Section 5 of our General Terms and Conditions shall remain unaffected, subject to the conditions
set out therein.
4.
Any damage caused by improper installation or incorrect, negligent or forceful operation shall invalidate
the warranty. There shall be no liability for consequential damage.
Technical changes and errors excepted.
Warranty
Please fill in to claim against the warranty: For warranty claims to be processed, you must send us the filled
in coupon and the garage/installation invoice!
12 V (–)
12 V (+)
earth
Technical support hotline
+49 (0) 7631 9727-80
Service address
Norbert Schaub GmbH
Robert-Koch-Strasse 20
79395 Neuenburg am Rhein
GERMANY
Tel. +49 (0) 7631 9727- 0
Fax +49 (0) 7631 9727-27
info@stop-go.de
www.stop-go.de
Function
Trouble
Installation
check
shooting
Garage stamp
Date of purchase
Circuit
Warranty
EN
diagram
Unit serial number
9
Publicidad
