General Safety; Electrical Safety; Safe Use And Contact With Water; Safety During Operation And Maintenance - Astralpool Glassy L Manual De Instalación, Operación Y Mantenimiento

[en]
Fountain units
1

GENERAL SAFETY

1.1

ELECTRICAL SAFETY

Disconnect the equipment from the power supply when carrying out any assembly or
-
maintenance work.
Do not touch or get into the water while the equipment is connected to the electrical
-
power supply.
Use H07RN-F heavy-duty waterproof trailing cable to connect the unit.
-
1.2

SAFE USE AND CONTACT WITH WATER

The water where the equipment is installed should comply with the following
-
specifications:
In freezing conditions with temperatures below 4 °C, empty the equipment to avoid
-
breakage due to ice forming inside it.
Do not manipulate the factory waterproofing seals. This could void the guarantee.
-
1.3

SAFETY DURING OPERATION AND MAINTENANCE

Do not open or manipulate any component in the equipment except as explained in this
-
manual.
Do not handle the equipment with damp or wet hands.
-
Only authorised personnel or trained technicians may have access to the equipment. Do
-
not allow access to unauthorised personnel or untrained technicians.
16
Water characteristic
Temperature
pH
Free chlorine
Complete Alkalimetric Titre
(CAT)
Calcium Hardness (CH)
Salinity
Total dissolved solids
(TDS)
Minimum
value
4 °C
6.9
0.5 ppm
80 ppm
-
-
-
Installation, operation and maintenance manual; Glassy Jet
Maximum value
35 °C
7.8
2.0 ppm
120 ppm
1,000 ppm
2 g/L
2,000 ppm