Water jet trajectories for models:
66559, 66560 and 67306 (x, y in metres,
angles of 75º, 60º and 45º)
5
TROUBLE SHOOTING
Problem
The Glassy water jet is not regular
throughout its trajectory.
The LED in the Glassy does not turn on.
The jumping function micro cuts do not
work.
In the case of other problems, or if the solutions above do not resolve the problem, contact
our technical department (see the contact list included with the product guarantee).
Installation, operation and maintenance manual; Glassy Jet
Water jet trajectories for models:
66561, 6662 and 67307 (x, y in metres, angles
of 75º, 60º and 45º)
Solution
The Glassy's water jet is extremely sensitive
to winds (including moderate winds).
Protect the Glassy from currents of air.
-
Check that the internal foam pieces are
-
in good condition and do not obstruct
the water flow.
Check that the LED is connected
-
correctly (③).
Check the installation and programming
-
of the DMX modules.
Check that the water jet cut-off blade is
-
connected correctly (①).
If the jumping function is operated
-
manually, check that the relay is
correctly installed.
[en]
Fountain units
19