Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Eos 1
Humidify / Dehumidify Controller
Easy Guide
VANCOUVER, W ASHINGTON U.S.A.
Instructions for Use
1. Mount Eos 1 near humidifi er/dehumidifi er, or
fan to be controlled, but away from water, mist,
vapor, etc.
2. Switch controller to Humidify or Dehumidify.
3. Set preferred humidity/dehumidity level on dial.
4. Plug equipment to be activated into female
side of piggyback cord set.
5. Turn "On" power to humidifi er/dehumidifi er/fan
to be controlled.
6. Plug male side of piggyback cord set into 120 volt,
15 amp outlet.
7. The Eos 1 will now activate and deactivate
equipment based on preferred setting.
Controller Specifi cations
Size: 8"
4"
2"
H x
W x
H
Weight: 2 lbs.
Voltage Input: 120 volts
Voltage Output: 120 volts
Maximum Amperage: 15 amps
Hertz: 60 Hz
Differential: 4%
Min/Max Humidity Control Level: 10% RH to 90% RH
(non-condensing)
Cord Set: 6 feet/14AWG/SWJT
o
o
Storage Temperature: 0
to 135
F
o
o
Operating Temperature: 40
to 110
F
www.titancontrols.net
For technical assistance call us at
1-888-80-Titan or 1-888-808-4826.
Controlling a Humidifi er
Eos 1
Humidifier
Controlling a Fan
Eos 1
Controlling a Dehumidifi er
Eos 1
Fan
Dehumidifie
Publicidad
Manuales relacionados para Titan Controls Eos 1
Resumen de contenidos para Titan Controls Eos 1
- Página 1 Instructions for Use Controlling a Humidifi er 1. Mount Eos 1 near humidifi er/dehumidifi er, or Eos 1 fan to be controlled, but away from water, mist, vapor, etc. Eos 1 2. Switch controller to Humidify or Dehumidify. 3. Set preferred humidity/dehumidity level on dial.
- Página 2 Instrucciones de uso Control de un humidifi cador 1. Instale la unidad Eos 1 cerca del humidifi cador/deshu- Eos 1 midifi cador o el ventilador que se controlará, pero lejos de atomizadores, vaporizadores, agua, etc. 2. Coloque el controlador en la posición de humidifi - cación (Humidify) o de deshumidifi...