Operation - Bartscher 110801 Instrucciones De Servicio

Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid specification should
be compared with that of the device (see rating plate). Connect the device only
in case of compliance!
Connect the device only to properly installed single socket with
protective terminal.
•
Before connecting the device to the power supply during the first use, position the
device and leave it for at least 2 hours for the coolant to flow down.
•
After a power outage or after removing the plug from its socket do not connect
the device to a power source for at least 5 minutes.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.

5.2 Operation

•
After unpacking and prior to connection, clean the device according to the
instructions in 6 "Cleaning and m
•
Connect the device to a single, grounded outlet.
•
Turn the device on via the ON/OFF switch located at the front. The green power
control light will come on.
•
When turned on, the display will show the following:
temperature will also be shown.
•
Before placing food products and beverages inside, the refrigerated counter
should first reach the desired temperature.
aintenance
".
.
and The default
- 33 -