Installation And Operation; Installation - Bartscher 200240 Manual Del Usuario

5. Installation and operation

5.1 Installation

Positioning

Unpack the device and remove all package materials according to the valid
environment protection regulations.

Before the first use, remove the protective foil from the device. Remove the foil slowly
not to leave glue residues. Remove possible glue residues with appropriate solvent.
CAUTION!
Never remove the nameplate and warning signs from the device.

Put the device on an even, stable, dry and waterproof surface which is resistant to
high temperature.

Never place the device on an inflammable surface.

Never place the device at the edge of a table to avoid tilting or falling.

Never put the device in a moist or wet area.

Do not place the device near open flame, electric heaters or other heat source.

Place the device so that the plug is easily accessible so as to quickly disconneet the
device if the need arises.
- 31 -