Grundig DSB 980 Manual De Usuario página 42

SYSTEM SETTING ____________________________
Quick view of control buttons for
menu system settings
• Press [MENU] to open the menu. Press again
to close the menu and return to playing screen.
• On the menu, press [ , , , ] button on the
remote control to move along the entries.
• Press [ ] to confirm; press [ ] on the remote
control to step back.
• You can recall this Setup Wizard from the
< System Settings > any time you want by
pressing the[MENU] button on remote control to
edit or create a new WI-FI connection.
• (e.g. Current mode menu > System Settings >
option "Setup wizard")
System Settings
Equaliser
Streaming audio quality >
Network
Time/Date
Inactive Standby
Language
Factory Reset
Software Update
Setup Wizard
Info
Privacy Policy
Backlight
Equaliser
• Several preset EQ modes are available: VOICE /
SPORT / MOVIE / MUSIC. Press» EQ « to select.
Streaming audio quality
- Low quality
- Normal quality
- High quality
42 ENGLISH
• Select the required level of audio quality for the
• The currently set quality level is indicated with
Network
Networkwizard:
• Enter to search AP SSID, then input the WEP /
PBC Wlan setup:
• Push Button Configuration, it is to connect the
>
View settings:
• View the information of current connected
>
>
>
> Manual settings:
• Enable or disable DHCP (Dynamic Host
>
Network profile:
• The device remembers the last four wireless
available stremming services. The actual bit rate
for each level depends on the service being
used.
an asterisk.
WPA key or choose Push Button/Pin/Skip WPS
to connect to the wireless network.
AP that supports WPS (Wi-Fi Protected Setup).
network: Active connection, MAC address, Wlan
region, DHCP, SSID, IP address, Subnet mask,
Gateway address, Primary DNS and Secondary
DNS.
Configuration Protocol). Input the SSID, WEP /
WPA key and/or other configuration.
networks it has connected to, and automatically
tries to connect to whichever one of them it can
find. From here you can see the list of registered
networks. You can delete unwanted networks.
Clear network settings: Select "YES" to clear
all the current network settings. Select "NO" to
cancel.