Kohler K-21107-ST Guía De Instalación Y Cuidado página 8

5. Install the Shelf
Position the shelf on the floor beneath the sink.
Attach the back of the shelf to the two rear hangers using screws,
lock washers, and nuts. Tighten the nuts until just snug.
Repeat for the front of the shelf.
Verify that the side-to-side spacing between the sink legs and the
front of the shelf is even. Shift the shelf position slightly as
needed.
NOTICE: To ease access to the screws, use a Phillips screwdriver
from beneath the shelf.
Use a Phillips screwdriver to secure the shelf to the wall with
screws.
Securely tighten all the remaining hardware.
Double check that the spacing between the legs is even.
Use a level or straight edge along the back of the shelf, and
double check that the shelf is flat and does not sag. Add extra
washers (provided) between the hangers and the sink to correct
any sagging.
Adjust the side-to-side spacing by slightly loosening the
wall-mount screws and shifting the shelf right or left as needed.
Retighten the screws.
1323346-2-A 8 Kohler Co.