Power Switch - Zyxel WAH7130 Guia De Inicio Rapido

Power Switch

To turn on the device, slide the power switch to the power icon (
displays in the OLED screen.
To turn off the device, slide the power switch to the power icon (
icon ( ) displays in the OLED screen.
If the WAH7130 is in normal mode and the OLED display is turned off, slide the power switch to
the power icon ( ) and release to turn on the OLED display.
When the device is in sleep mode, Wi-Fi will be disabled and the mobile data connection will be
disconnected. To have the device enter sleep mode, make sure the OLED display is on, slide the
power switch to the WPS icon (
the OLED display, slide the power switch to the WPS icon (
OLED Icons
OLED Icon Description
There is no SIM card inserted. Go to Hardware Installation.
The SIM card is inserted improperly or the PIN code is incorrect. Go to Hardware Installation or
Initial Configuration.
The mobile data connection is disconnected because no SIM card is inserted or the PIN code is
incorrect. Go to Hardware Installation or Initial Configuration.
The WAH7130 fails to establish a data connection. The APN, user name and/or password may be
wrong. Go to Initial Configuration.
The SIM card is blocked by your ISP. Get a PUK code from the ISP to enable the SIM card.
The mobile data connection is up.
The more bars that display, the stronger the signal strength.
The battery is getting low.
The battery is being charged.
The battery is fully charged.
The battery cannot be charged. If the battery temperature gets too high, remove the battery for a few
moments and then reinsert it.
) and release. To get the device back to normal mode, turn on
) and hold until the ZyXEL logo
) and hold until the power off
) and release.
5
ENGLISH