Unpacking
Carton Contents:
• Reel mower body
• Upper handle
• Middle handle bar (2)
• Lower handle
• Handle knob and bolt (6)
• Grass catcher
• Hex wrench
• Paper test strips (20)
• Manual with registration card
1. Carefully remove the manual reel mower and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store.
Please call the Snow Joe
center at 1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new manual reel
mower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
+ Sun Joe
customer service
®
®
Assembly
Fitting the handle
NOTE: Do not tighten the knobs completely until assembly
is complete.
1. Secure the two middle handle bars to the upper handle
using the first set of knobs and bolts provided. Tighten the
knobs on each side to ensure a secure fit (Fig. 1).
Fig. 1
Upper handle
Middle
handle
Bolts
bars
2. Attach the upper and middle handle assembly to the lower
handle using the remaining knobs and bolts provided.
Tighten the knobs on each side to ensure a secure fit
(Fig. 2).
Fig. 2
Bolts
Knobs
5
Knobs
Middle
handle
assembly
Bolts
Lower handle