Horizon Global 24992 Instrucciones De Instalación página 4

1. Remove carbon canister splash guard panel – Using a flathead screwdriver,
remove (2) push pin-rivets from carbon canister splash guard panel on
driver side. Remove the panel from (2) studs on the frame rails and spare
tire panel. Return to vehicle owner.
©2020 Horizon Global Americas Inc. - Printed in Mexico
2. Loosen rear wheel well liners – Using a flat head screwdriver, remove (2)
push-pin rivets from the rear wheel well liners, per side. Using a short
Phillips screwdriver, remove (2) screws from the side of wheel well liner, per
side. Keep for reinstallation.
Sheet 4 of 27 24992NP 2-14-20 Rev. A