Autoclima Fresco 5000 Back Instrucciones Para El Uso página 22

The following are the menus which can be modified:
P0 - Timer (MIN mode)
P1 - Timer (AUTO mode)
P2 - Timer (MAX mode)
A3 - Celsius and Fahrenheit degrees
A4
- Offset
A5 - Battery saver value
A5
0
1
2
3
4
5
6
7
8
9
22
In MIN mode,
can be changed in this menu. The choice range is between 1 and 50
In AUTO mode,
can be changed in this menu. The choice range is between 1 and 50
In MAX mode, the system operates at its max power for the preset minutes.
between
The system's default setting is Centigrade degrees (C). This menu allows you to change the
parameter to Fahrenheit degrees (F).
This refers to the temperature difference detected by the probe and the temperature shown on
the display. This menu allows you to change this value from -9°C to +9°C with 1°C increments
The default setting is 21.5 Vdc (Cut-out) and 24 Vdc (Cut-in).
values based
24Vdc
Cut-out Cut-in
20
20.3
20.6
20.9
21.2
24.5
21.5
21.8
22.1
22.4
22.7
IT IT EN FR DE ES EN FR DE ES
the system's default setting is 6 hours of continuous operation. The default value
the system's default setting is
1 and 50 minutes. The system switches to the AUTO mode.
on the following table. Values shown in bold are the default ones.
A5
10
11
12
13
14
15
16
17
18
19
hours.
4 hours
of continuous operation. The default value
hours.
This menu allows to change these
24Vdc
Cut-out Cut-in
20
20.3
20.6
20.9
21.2
24
21.5
21.8
22.1
22.4
22.7
The choice range is