Important - XBOX Elite 360 Manual

COnneCt tO YOur tV anD auDiO SYSteM

iMPOrtant

Stationary images in video games can "burn"
into some TV screens, creating a permanent
shadow. Consult your TV owner's manual or
manufacturer before playing games.
Connect the Composite aV Cable
Use your composite AV cable to connect your
console to your TV.
To connect to your standard TV:
Connect the composite AV cable connector
1
to the AV port on the console.
Connect the color-coded connectors to the
2
corresponding inputs on the TV: yellow to
yellow (video), red to red (right audio), and
white to white (left audio). You can also
connect audio to a stereo receiver.
For monaural (mono) TVs, which have only
one audio input, connect either the right or
left audio connector to the audio input.
Select the appropriate video input on your
3
TV (see No Picture under "Troubleshooting"
for further information).
4
After you've set up your console, you can
configure additional console audio settings
and test your connection in the Xbox
Dashboard. But before doing so, proceed
through the steps in the following pages for
connecting to power, connecting your
controller, and other initial settings.
Other aV input
You can also connect to additional TV input
types by using the Xbox 360 Component HD
AV cable, the Xbox 360 S-Video AV Cable, the
Xbox 360 VGA HD AV Cable, or the Xbox 360
HDMI AV Cable (all sold separately). For more
information, go to www.xbox.com/setup.