Taurus CA-2002 Manual De Instrucciones página 12

- This appliance is intended for adult use.
Ensure that this product is not used by the
disabled, children or people unused to its
handling.
- This appliance should be stored out of
reach of children and/or the disabled.
- Make sure that dust, dirt or other foreign
objects do not block the fan grill on the
appliance.
- Turn the thermostat control to the
minimum (MIN) setting. This does not mean
that the iron is switched off permanently.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
Instructions for use
- Unroll the cable completely before plug-
ging it in.
- Connect the appliance to the mains.
- Position the appliance to direct the airflow
in the desired direction. (Fig. 3)
- Turn the appliance on, by using the selec-
tion knob.
Fan function:
- Select the fan position.
- Check that the thermostat button is set to
the maximum.
Heater function:
- Select the heater position.
- Select the desired heating power.
- Check that the thermostat control is set to
the temperature required
Carry handle/s:
- This appliance has a handle on the back
Manual CA 2002 Jan 2010.indd 12 Manual CA 2002 Jan 2010.indd 12
to make it easy and convenient to transport.
(Fig. 1)
Once you have finished using the ap-
pliance:
- Select the minimum position (MIN) using
the speed control.
- Stop the appliance, selecting position 0 on
the selector control.
- Unplug the appliance from the mains.
Safety thermal protector:
- The appliance has a safety device, which
protects the appliance from overheating.
- If the appliance turns itself off and does
not switch itself on again, disconnect it
from the mains supply, and wait for ap-
proximately 5 minutes before reconnecting.
If the machine does not start again seek
authorised technical assistance.
Wall-mounted option (Fig. 2)
- Remove the adjustable foot from the
appliance. To do so, press the two catches
which support the swivel pins of the plate
with regard to the appliance body.
- Use the adjustable foot as a template for
marking the two mounting holes on the wall.
- Insert the plugs (not included) in the wall.
- Place the adjustable foot in the wall
and screw it into the plugs (screws not
included).
- Fit the appliance body into the two
catches which support the swivel pins of the
adjustable foot.
- In the event that the appliance is mounted
on a bathroom wall, position it in such a
way that the socket, power supply cable,
switches or other controls are not within the
22.02.10 15:16:55 22.02.10 15:16:55