Cleaning Instructions - impress IM-720BX Guia De Inicio Rapido

PARTS
1. Top Cover
2. Switch Knob
3. Front Grill
4. Rear Grill
5. Blade
6. Side panel
7. Base cover
8. Supporting
9. Rubber feet
Take out the fan from the packing carton, place the fan upside down, rotate the support
90° counterclockwise to make it on the using position (Fig 2) then turn the fan upright.It
will be ready to work when you plug.(Fig 3)
Rotate the support 90°
Fig.1
OPERATING INSTRUCTIONS
WARNING: Do not use this product in
windows, as a risk of electrical shock ex-
ists and serious personal injury and/or
property damage may occur.
1. Set your fan on a level and dry surface.
2. Make sure the rotary switch is at "OFF" position.

CLEANING INSTRUCTIONS

WARNING: To avoid the risk of electri-
cal shock, always make sure the product
is unplugged from the electrical outlet
before servicing or cleaning.
CAUTION: This fan is not intended to
be disassembled for cleaning for internal
parts (e.g. blade, motor). Disassembly
may result in product damage. Never
ASSEMBLY
Location for the bracket
Fig.2
when using.
Plug the unit into a standard 120Vac 60Hz outlet.
3. To turn the unit, turn the rotary switch to the de-
sired fan speed setting "1" (LOW), "2" (MEDIUM)
or "3" (HIGH).
4. To stop the unit, turn the rotary switch to "OFF"
position.
5. Unplug the product from the electrical outlet when
it is not in use or is left unattended.
use liquids or abrasive cleaners to clean
the product.
1. Be sure to unplug from the electrical supply source
before cleaning.
2. Plastic parts should be cleaned with mild soap and
a damp cloth or sponge.
Thoroughly to remove soap film with clean water.
3. Be sure not to make water or other liquid enter in-
side of motor.
Fig.3
English - 2
1
2
3
4
5
6
7
8
9